High pressure pneumatic water pump
- Product parameters:
- Working voltage
- AC110V/220V DC24V
- Input air pressure
- Special Coating
- Lubricating oil
- R32#or air compressor oil
- Output water pressure
- 30-120kg
Terms and Conditions:
1.Before turning on the water pump,make sure that the voltage,wind pressure,and
pure water (or discharge oil)are all in place.
2.Regularly check and clean stains,scale,and waste residue on the water storage barrel
and filter to keep the working fluid clean.
3.Do not let the water pump work without water for a long time to avoid wearing out
the seals of the pump accessories.
4.It is strictly forbidden for water or other liquids to enter the water pump control
circuit.
5.Water pump working fluid:pure water or discharge oil.
6.Recommended pump maintenance cycle:4 months/time.
1.Before turning on the water pump,make sure that the voltage,wind pressure,and
pure water (or discharge oil)are all in place.
2.Regularly check and clean stains,scale,and waste residue on the water storage barrel
and filter to keep the working fluid clean.
3.Do not let the water pump work without water for a long time to avoid wearing out
the seals of the pump accessories.
4.It is strictly forbidden for water or other liquids to enter the water pump control
circuit.
5.Water pump working fluid:pure water or discharge oil.
6.Recommended pump maintenance cycle:4 months/time.
